How to Install a Covertech Belt Clip on Your Saber

Quick Answer

To install a covertech belt clip on your saber, you'll need a compatible pommel with a threaded hole, the clip itself, and a screwdriver. Simply align the clip over the pommel hole, insert the screw, and tighten it securely. Always check that the clip is centered and doesn't interfere with blade installation.

Adding a covertech belt clip to your saber makes it easy to carry on your belt or costume without needing a separate holster. Whether you're heading to a convention or just want your hands free, a properly installed clip keeps your saber secure and within reach. This guide walks you through the process step by step.

Before you start, gather your saber, the covertech clip, and a suitable screwdriver. Most clips attach to the pommel, so ensure your pommel has a pre-drilled hole. If not, you may need to purchase a compatible pommel. Let's get started.

Understanding Covertech Belt Clips

Covertech belt clips are designed to let you attach your saber to a belt or strap, keeping it secure while you move. They come in various styles, but most use a single screw that threads into the pommel. This simple mechanism is durable and reliable, making it a popular choice among saber enthusiasts.

When choosing a clip, consider the weight of your saber. Heavier sabers may benefit from a clip with a wider base to distribute the load. Also, check the screw length to ensure it doesn't protrude into the saber's interior, which could interfere with the electronics or blade.

• Ensure your pommel has a threaded hole that matches the screw size of your clip.
• If your saber has sound, be careful not to damage the speaker or wiring when inserting the screw.

Preparing Your Saber for Installation

First, disassemble your saber if necessary. Remove the blade and any internal components that might be in the way. This prevents accidental damage and gives you better access to the pommel. If your saber is fully assembled, you may only need to remove the pommel.

Once the pommel is off, inspect the threaded hole. Clean out any debris or old thread-locking compound. A clean thread ensures a secure fit and prevents the screw from stripping. If the hole is shallow, you might need a shorter screw.

• Use a soft cloth to wipe the pommel threads clean.
• Check that the screw fits easily into the hole before adding the clip.

Attaching the Covertech Clip

Position the clip over the pommel's threaded hole, aligning the screw hole on the clip with the pommel's. Insert the screw and hand-tighten it first to ensure it's not cross-threaded. Then, use a screwdriver to tighten it securely, but avoid over-tightening as it can strip the threads.

After tightening, test the clip by gently pulling on it to ensure it's firmly attached. If it feels loose, remove the screw, apply a small amount of thread-locking adhesive, and re-tighten. This prevents the screw from loosening during use.

• A common mistake is over-tightening, which can damage the threads. Tighten until snug, then give a quarter turn more.
• If the clip rotates, you may need a small washer to keep it in place.

Step-by-Step Installation Process

1. Step 1: Remove the Pommel: Unscrew the pommel from your saber. If it's tight, use a strap wrench or a rubber grip to avoid scratching the metal. Checkpoint: Ensure the pommel is free of debris and the threads are clean.
2. Step 2: Align the Clip: Place the covertech clip over the pommel's threaded hole, aligning the screw holes. Ensure the clip's orientation is correct for your belt (usually vertical). Mistake to avoid: Misalignment can cause the clip to sit crookedly, affecting its hold.
3. Step 3: Insert and Tighten the Screw: Hand-thread the screw to avoid cross-threading, then tighten with a screwdriver. If the screw is too long, it may interfere with the blade or electronics. Checkpoint: The clip should be snug but not overly tight. Apply thread-locker if needed.
4. Step 4: Test the Clip: Reattach the pommel to the saber. Gently pull on the clip to ensure it's secure. Attach it to your belt and practice drawing the saber. Mistake to avoid: A loose clip can cause your saber to drop. If it wiggles, tighten the screw or add a washer.

Product Considerations

• 06 Pommel: The 06 Pommel features a durable one-piece design. Large fins give this pommel a futuristic feel. It has a male threading and inner diameter of 1.5 inches. The 06 Pommel's one-piece design provides a solid base for mounting a covertech clip, and its male threading ensures compatibility with many saber bodies.
• Juggernaut Pommel Mk2: Juggernaut Pommel features a durable one piece design. This extra large pommel can double as a mace head and acts as a counterweight for a balanced grip. It has male threading and inner diameter of 1.125 inches. Its larger size offers more surface area for a clip, and the counterweight effect can help balance a heavier saber when worn on a belt.

Installing a covertech belt clip is a straightforward upgrade that adds convenience and style to your saber. With the right pommel and careful attention to alignment and screw tightness, you'll have a reliable way to carry your saber wherever you go. If you run into any issues, consult your saber's manual or seek help from the community.